If you ask any reputable pool service Boca Raton professional about some ways to keep your swimming pool clean and sparkling all year around, they will ask you to first take essential preventive measures.
1. Invest In Preventive Measures
This means that you need to prevent any mess or contaminants from entering into your swimming pool in the first place. Install proper fencing around your pool and also invest in a good set of filters and pool covers that are going to keep your pool cleaning service in boca raton hygienic for use round the year.
2. Clean Out Your Skimmer Basket Regularly
Do you know that your skimmer baskets can get dirty and crammed up with scum very frequently? The skimmer basket is installed for a very practical reason which is to skim the surface of the pool for any debris and contaminants. These are most commonly installed inside of the pool and may become saturated with contaminants and tend to float down to the bottom of it when not cleaned on time. You need to keep the skimmer basket as effective as possible to prevent any contaminants and debris from sinking down into your pool.
3. Do You Clean Your Lint Pot?
You need to clean your lint pot every couple of weeks or as you think is necessary. You will have to turn off the pump and release pressure on the system to do this. You can easily find this pot or basket installed inside the clear glass of your pool pump. You can also invest in a leaf trapper and debris removal system.
4. Check Your Water Level
Do not forget to check the water level of your pool every now and then because it needs to be at the centre level of your pool skimmer or pool tile so that any cleaning equipment that you have installed is able to give results. If the pool water is too low, you may risk the pump getting dry and burned out. If the water is too high, the skimmer door will not be able to function properly and you will not be able to remove any debris from the pool water.
5. Check Your Chlorination
You need to check your chlorination for proper chlorine tablet levels. It will also tell you about loading or possible clogging. You will have to pick a model of the chlorination depending on the features that you want, such as the ability to add a minimum amount of chlorine at a regular interval or notify you of the same when the water needs to be chlorinated.